Patch "usb: pch_udc: usb gadget device support for Intel Quark X1000" has been added to the 3.16-stable tree

[g***@linuxfoundation.org]

This is a note to let you know that I've just added the patch titled

usb: pch_udc: usb gadget device support for Intel Quark X1000

to the 3.16-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-pch_udc-usb-gadget-device-support-for-intel-quark-x1000.patch
and it can be found in the queue-3.16 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,

From a68df7066a6f974db6069e0b93c498775660a114 Mon Sep 17 00:00:00 2001

From: Bryan O'Donoghue <***@intel.com>
Date: Mon, 4 Aug 2014 10:22:54 -0700
Subject: usb: pch_udc: usb gadget device support for Intel Quark X1000

From: Bryan O'Donoghue <***@intel.com>

commit a68df7066a6f974db6069e0b93c498775660a114 upstream.

This patch is to enable the USB gadget device for Intel Quark X1000

Signed-off-by: Bryan O'Donoghue <***@intel.com>
Signed-off-by: Bing Niu <***@intel.com>
Signed-off-by: Alvin (Weike) Chen <***@intel.com>
Signed-off-by: Felipe Balbi <***@ti.com>
Signed-off-by: Chang Rebecca Swee Fun <***@intel.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/usb/gadget/Kconfig | 3 ++-
drivers/usb/gadget/pch_udc.c | 22 +++++++++++++++++++---
2 files changed, 21 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -438,7 +438,7 @@ config USB_GOKU
gadget drivers to also be dynamically linked.

config USB_EG20T
- tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+ tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
depends on PCI
help
This is a USB device driver for EG20T PCH.
@@ -459,6 +459,7 @@ config USB_EG20T
ML7213/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7831 is completely compatible for Intel EG20T PCH.

+ This driver can be used with Intel's Quark X1000 SOC platform
#
# LAST -- dummy/emulated controller
#
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
* @setup_data: Received setup data
* @phys_addr: of device memory
* @base_addr: for mapped device memory
+ * @bar: Indicates which PCI BAR for USB regs
* @irq: IRQ line for the device
* @cfg_data: current cfg, intf, and alt in use
* @vbus_gpio: GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
struct usb_ctrlrequest setup_data;
unsigned long phys_addr;
void __iomem *base_addr;
+ unsigned bar;
unsigned irq;
struct pch_udc_cfg_data cfg_data;
struct pch_vbus_gpio_data vbus_gpio;
};
#define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget))

+#define PCH_UDC_PCI_BAR_QUARK_X1000 0
#define PCH_UDC_PCI_BAR 1
#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC 0x0939
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D
#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_de
iounmap(dev->base_addr);
if (dev->mem_region)
release_mem_region(dev->phys_addr,
- pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+ pci_resource_len(pdev, dev->bar));
if (dev->active)
pci_disable_device(pdev);
kfree(dev);
@@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev
dev->active = 1;
pci_set_drvdata(pdev, dev);

+ /* Determine BAR based on PCI ID */
+ if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+ dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+ else
+ dev->bar = PCH_UDC_PCI_BAR;
+
/* PCI resource allocation */
- resource = pci_resource_start(pdev, 1);
- len = pci_resource_len(pdev, 1);
+ resource = pci_resource_start(pdev, dev->bar);
+ len = pci_resource_len(pdev, dev->bar);

if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3212,6 +3222,12 @@ finished:

static const struct pci_device_id pch_udc_pcidev_id[] = {
{
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+ .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class_mask = 0xffffffff,
+ },
+ {
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
.class_mask = 0xffffffff,


Patches currently in stable-queue which might be from ***@intel.com are

queue-3.16/usb-pch_udc-usb-gadget-device-support-for-intel-quark-x1000.patch